Commercial Steel Garage Doors

High-strength steel garage doors have great value.

900 Series

900 Series

The 900 Series Industrial steel garage doors are strong and are designed for applications such as warehouse buildings and other commercial or industrial buildings. Deep ribs are rolled formed into the door giving the door construction added strength. Doors are available both 24 and 20 gauge galvanized steel that are protected with a white polyester finish. Insulation and back skin options are available as well as windows and several glass options.

CONSTRUCTION

The 900 Series is constructed of 24 gauge pre-finished galvanized steel. Horizontal meeting rails are rolled-formed with a shiplap joint acting as an integral strut and weather joint. Section faces are deep ribbed for added strength. End stiles are “U” shaped formed from 18 gauge galvanized pre-painted steel and completely encloses and protect the end of the door from damage and also serve as a flat smooth service for exterior weather seal. 18 gauge galvanized intermediate stiles are permanently attached at each end as well as midpoints as required for long life and rigidity. Bottom section is furnished with a full width aluminum reinforcing angle/retainer fitted with compressible loop-type weather seal design for continuous contact at sill.

NOMINAL SPECIFICATIONS

  • Steel Thickness: 24 GA (Model 924) or 20 GA (Model 920), G 40 galvanized and painted
  • Overall Thickness: 2″
  • Section Heights: 21″ and 24″
  • Section Joint: Shiplap joint between sections
  • End Stiles & Center Stiles: 18 GA galvanized, End Stiles are galvanized and painted
  • Bottom weather seal: U-shape loop type vinyl with adjustable aluminum retainer
  • Finish: 4 Coat Process, Galvanizing, bonderizing, baked on epoxy, and polyester top coat
  • 1 Year Limited Warranty
STANDARD WIDTHS: 8′-2″ 9′-2″ 10′-2″ 12′-2″ 14′-2″ 16′-2″ 18′-2″ 20′-2″ 22′-2″ 24′-2″
Bays Horizontally 2 2 3 3 4 4 5 5 6 6
STANDARD HEIGHTS: 8′-1″ 9′-1″ 10′-1″ 12′-1″ 14′-1″ 16′-1″
Sections Vertically 4 5 5 6 7 8

OPTIONS

  • Widths up to 24′, heights up to 16′, (Max size dependant on weight of materials used)
  • 25,000, 50,000 & 100,000 high cycle torsion springs
  • Grommet style 18″x5″ security lites or mill finish aluminum full vision sections with standard 1/8″ annealed glass
  • Tempered, obscure, insulated glass or special glazing as specified by customer
  • Manual chain hoist or electric operation
  • Low clearance, high lift or vertical lift track and hardware also available
  • Insulation: Condition 5 =28 GA Backskin, Polystyrene Insulation, R=8.1

Condition 8 =25 GA Backskin, Polystyrene Insulation, R=8.1
Condition 7 =20 GA Backskin, Polystyrene Insulation, R=8.1
Optional: Urethane Insulation in lieu of Polystyrene, R=11.5

HARDWARE

15″ radius torsion hardware; track is 2″ hemmed and bracket mounted. 3″ track supplied when required by weight. Heavy duty steel rollers, non corrosive door fixtures and 14 gauge graduated hinges are standard. Double end hinges and long stem rollers are included on doors 16′-2″ wide or as required by weight. U-shaped galvanized struts are supplied on doors over 14′-2″ wide or as required by weight to keep the door rigid. All doors are standard with interior slide bolt lock.


Therma Series

Therma Series

The Therma Series Commercial/Industrial insulated steel garage doors are rugged and beautiful. They are designed to have a sleek and appealing appearance with great weather resistance. Therma Series doors are made with a sandwich type construction, steel outer skins are formed and then pressure bonded to a polystyrene core giving the door maximum strength, a natural Therma Break and superior insulating efficiencies. Three insulating values are available – R10.4, R12, and R16.

CONSTRUCTION

The Therma Series doors offers 3 different models all are made from hot dipped galvanized (G 40) wood grain textured steel skins that are sandwiched with a polystyrene core. This type of construction forms a natural thermal barrier between front and back of door. 20 gauge steel backer plates are toggle locked to the inside of the back skin prior to assembly. Exterior skins are secured to a polystyrene core with urethane adhesive, a method of construction that is unparalleled in strength. R16*, R12* and R10.4* to fit your needs.

* R Values are calculated specifically for the colder climates and offer the best long term insulating value.

NOMINAL SPECIFICATIONS

  • Models:
    • 650, R16* – 3″ Thick High Density EPS (expanded polystyrene)
    • 308TM, R12* – 2″ Thick High Density EPS
    • 308, R10.4 – 2″ Thick EPS
  • Door Face: Wood grain texture, pencil grooves 4″ on center
  • Section Heights: 21″ and 24″
  • Section Joint: Tongue and Groove joint between sections with thermal break and flexible vinyl seal
  • 20 gauge steel concealed backer plates, pre-painted 20 GA galvanized end caps
  • Finish: 4-Coat Process, Galvanized, Phosphate Treated, Baked-on Epoxy Base Coat, and Polyester Top Coat
  • Colors selection: White
  • Bottom weather seal: U-shape loop type PVC with adjustable aluminum retainer
  • 1 Year Limited Warranty
STANDARD WIDTHS: 8′-2″ 9′-2″ 10′-2″ 12′-2″ 14′-2″ 16′-2″ 18′-2″ 20′-2″ 22′-2″ 24′-2″
Bays Horizontally 2 2 3 3 4 4 5 5 6 6

STANDARD HEIGHTS: 8′-1″ 9′-1″ 10′-1″ 12′-1″ 14′-1″ 16′-1″
Sections Vertically 4 5 5 6 7 8

OPTIONS

  • Widths up to 24′, heights up to 16′ (larger sizes are available in some cases depending on the door weight, depends on door model and windows required)
  • 25,000, 50,000 & 100,000 high cycle torsion springs
  • Windows, Standard with 1/8″ Clear Single-pane Glass
  • Tempered, obscure, insulated glass or special glazing as specified by customer
  • Manual chain hoist or electric operation
  • Low clearance, high lift or vertical lift track and hardware
  • Powder coated track and hardware

HARDWARE

15″ radius torsion hardware; track is 2″ hemmed and bracket mounted. 3″ track supplied when required by weight. Heavy duty steel rollers, non corrosive door fixtures and 14 gauge graduated hinges are standard. Double end hinges and long stem rollers are included on doors as required by width and weight. U-shaped galvanized struts are supplied as required by width and weight to keep the door rigid. All doors are standard with interior slide bolt lock.