Residential Steel Garage Doors

Therma Classic

Therma Classic

The Therma Classic™ is an insulated Carriage House Style steel garage door. The Therma Classic simulates the look of old fashioned swing type doors and available in large selection of attractive designs. The design patterns are a deeper pattern than most steel garage doors, “High Definition”. This makes the doors more visible from a distance thus enhancing a homes curb appeal. True arched windows in a variety of window designs are also available. Doors come with a white polyester finish and can be easily field painted to match any homes exterior.

CONSTRUCTION

The Therma Classic is made from hot dipped galvanized wood grain textured steel skins that are embossed with raised panel designs then sandwiched with a polystyrene core. This type of construction forms a thermal barrier between front and back of door. 20 Ga. steel backer plates are toggle locked to the inside of the back skin prior to assembly. Exterior skins are secured to a polystyrene core with Urethane adhesive, a method of construction that is unparalleled in strength. Therma Classic doors are available in 2 design series. The S Series doors have multiple vertical panels embossed to form the various designs. The R Series doors start with 40″ x 24″ embossed recessed panels. Then roll formed pre painted wood grain textured aluminum design elements are mechanically attached as well as bonded to the face of the recessed panels to form a multitude of designs.

NOMINAL SPECIFICATIONS

  • Section Joint: Tongue and Groove joint between sections with thermal break
  • Thickness: 2″
  • R Value = 9 (Calculated door section R Value in accordance with DASMA-163)
  • Finish: Baked on polyester enamel
  • Colors selection: White
  • Bottom weather seal: U-shape loop type vinyl with aluminum retainer
  • Limited Lifetime Warranty
STANDARD WIDTHS: 8′-0″ 9′-0″ 10′-0″ 16′-0″ 18′-0″ 20′-0″
PANELS WIDE: 2 2 2 4 4 4
ODD WIDTHS: 7′-6″ to 10′-11″ = 2 panels
11′-0″ to 14′-11″ = 3 panels
15’0″ to 20’0″ = 4 panels
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 12′-0″ 14′-0″
Sections available in 27″, 28″, 31″ and 32″ in height

OPTIONS

  • Widths up to 20′ in one inch increments, heights up to 14′
  • 1/8″ clear annealed glass standard, clear obscure and insulated glass optional.
  • Decorative hardware
  • 25,000, 50,000 & 100,000 cycle torsion springs
  • Low clearance, high lift and vertical lift track and hardware

HARDWARE

15″ or 20″ radius torsion hardware; track is 2″ bracket mounted. Quiet long life nylon rollers, non-corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.


Therma Elite

Therma Elite

Therma Elite™ garage doors offer a luxurious appearance and are a hybrid garage door. Using our insulated sandwich construction Therma Tech II flush steel door sections; we apply precision cut exterior quality composite overlay designs to create the largest selection of carriage style designs in the industry. These doors have an insulation value of 10.4 R, a Thermal Barrier Joint and are factory painted after assembly. Unlike other overlay doors the Therma Elite maintains uniform dimensions of the overlay components regardless of the door size. Over height and odd width doors are just as attractive as standard sizes.

CONSTRUCTION

The Therma Elite™ is made using hot dipped galvanized wood grain textured steel skins that are sandwiched with a (EPS) polystyrene core. This type of construction forms a true thermal barrier between front and back of door. 20 gauge steel backer plates are toggle locked to the inside of the back skin prior to assembly. A precision computer cut ½” thick exterior composite overlay is cut from large sheets of the composite material reducing the amount of joints that would exist if made with individual components. The overlay is mechanically attached and adhered to the steel door face. All joints between the overlay and door skin are then sealed/caulked, prime painted and finish paint applied.

NOMINAL SPECIFICATIONS

  • Section Joint: Tongue and Groove joint between sections with Thermal Break
  • Flexible Vinyl Joint Seal
  • Standard Overlay Dimensions (on flat): .401” Beveled Profile, Top Rail = 5”, Bottom Rail = 7 5/8”, End Stiles: 5”, Meeting Center Stiles Combined = 10”, Meeting Rails Combined = 5”,
    Design Groups 1, 2, A, B, V and X Stiles = 4 ½”,
    Design Group 3 = 3 ½” Stiles, Window Mullions = 9/16”
  • Standard Arch Radius: Single Car = 15’-0” Radius, Double Car = 2 at 15’-0” Radius or optional: 1 at
    58’-0” Radius
  • Overall Thickness: 2 ½”, (2” Steel Section + ½ Composite Overlay)
  • R Value = *10.4
  • Finish: Steel Sections = Baked on Polymer Enamel, finished door = High Performance Professional Grade Acrylic Primer and Enamel Top Coat
  • Color Selection: White
  • Bottom weather seal: U-shape loop type vinyl with aluminum retainer

* R values are calculated specifically for the colder climates and offer the best long term
insulating value.

STANDARD WIDTHS: 8′-0″
9′-0″
10′-0″
12′-0″
14′-0″
15′-0″
16′-0″
18′-0″
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″
SECTIONS: 1-24″
1-18”
2-21”
4-24” 1-24″
3-21”
5-24” 2-24″
4-21”
6-24″

OPTIONS

  • Widths up to 18′ in one inch increments, heights up to 12′ in three inch increments
  • 156 standard designs within 9 design groups, Custom Designs, Custom Arch Tops
  • Decorative hardware
  • 25,000, 50,000 & 100,000 cycle torsion springs
  • 1/8″ clear annealed glass standard, many optional glass types see list below
  • Low clearance, high lift or vertical lift track and hardware also available

HARDWARE

15″ or 12″ radius torsion hardware; track is 2″ bracket mounted. Quiet long life nylon rollers, non-corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.


Therma Tech – Tri Tech Insulated

Therma Tech

The Therma Tech™ line of insulated raised steel panel steel doors adds to Northwest Door’s reputation for quality, value and stylish designs. Four door series are available, all featuring a natural Thermal Break, the Therma Tech™ (R9), Therma Tech II™ (R10.4), Therma Max™ (R12) and Tri Tech™ (R16). All models are available in (Contemporary) smooth wood grain face, (Traditional) standard raised panels, (Ranch) longer raised panels or (Carriage) style panels. Doors are hot dipped galvanized then pre-painted in one of four standard colors: Bright White, Almond, Sandstone, and Brown. Many window designs are available.

CONSTRUCTION

The Therma Tech™ line is made from hot dipped galvanized wood grain textured steel skins that are embossed with one of four panel designs then sandwiched with a (EPS) polystyrene core. This type of construction forms a true thermal barrier between front and back of door. 20 gauge steel backer plates are toggle locked to the inside of the back skin prior to assembly. Exterior skins are secured to a (EPS) polystyrene core with Urethane adhesive, a method of construction that is unparalleled in strength. Four series: (1) Therma Tech™ (2) Therma Tech II™ (3)Therma Max™ (4) Tri Tech™

NOMINAL SPECIFICATIONS

  • Section Joint: Tongue and Groove joint between sections with Thermal Break
  • Flexible Vinyl Joint Seal on Therma Tech II, Therma Max, and Tri Tech
  • Thickness / R Value
    • Therma Tech, 1-1/2″ thick EPS, *R=9
    • Therma Tech II, 2″ thick EPS, *R=10.4
    • Therma Max, 2″ thick High Density EPS, *R=12
    • Tri Tech, 3″ thick High Density EPS, *R=16
      * R values are calculated specifically for the colder climates and offer the best long term insulating value.
  • Panel Types / Size
    • Contemporary Flush Wood Grain
    • Traditional Panel size: 20″x14″
    • Ranch Panel size: 42″x14″
    • Carriage Panel size: 19″x15″
  • Finish: Baked on polyester enamel
  • Colors selection: Bright White, Brown, Almond, Sandstone
  • Bottom weather seal: U-shape loop type vinyl with adjustable aluminum retainer
  • Limited Lifetime Warranty
STANDARD WIDTHS: 8′-0″ 9′-0″ 10′-0″ 12′-0″ 14′-0″ 15′-0″ 16′-0″ 18′-0″ 20′-0″
Traditional Panels 4 4 5 6 7 8 8 9 10
Ranch Panels 2 2 2 3 3 4 4 4 5
Contemporary Panels 2 2 2 3 3 4 4 4 5
Carriage Panels 4 4 4 6 6 8 8 8 8

Standard Heights: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″ 14′-0″
Sections 4-21″ 3-18″,2-21″ 6-18″ 2-18″,4-21″ 5-21″ 1-18″,6-21″ 8-21″

OPTIONS

  • Widths up to 20′ in one inch increments, heights up to 14′ in three inch increments
  • Up to 12 Window Designs
  • Powder Coated Hardware
  • Decorative Hardware for T10C Carriage Style
  • 1/8″ clear annealed glass standard, clear obscure and insulated glass optional
  • Extended Life 25,000, 50,000 & 100,000 cycle torsion springs
  • Low clearance, high lift or vertical lift track and hardware also available

HARDWARE

15″ or 12″ radius torsion hardware; track is 2″ bracket mounted. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.


500 Series

500 Series

Raised Panel Steel Doors offer beauty that’s maintenance free and at an economical price. Two types are available (500 Series, 25 Ga.) and (400 Series, 24 Ga.). Both 500 and 400 Series are wood grain textured and have two sizes of panels; the standard panel (Traditional Panel) or a longer raised panel the (Ranch). 8 different window designs and four colors are available, Bright White, Almond, Sandstone and Brown.

CONSTRUCTION

Our Steel Panel Doors are made from hot dipped 25 Ga. (500 Series) or optional 24 Ga. (400 Series) galvanized steel secured to heavy duty 20 Ga. pre painted stiles with both toggle locks and waterproof adhesive. Optional textured ABS vinyl-backed 3/4″ polystyrene insulation is bonded to each section to provide quiet, energy-efficient operation. Choose from three panel styles: Traditional Panel (Model 501), Ranch Panel (Model 502) and Carriage Panel (Model 50C).

NOMINAL SPECIFICATIONS

  • Section Joint: Tongue and Groove joint between sections
  • Thickness: 2″, all sections have hemmed edges
  • R Value: Insulated models R=4.3
  • Traditional Panel size: 20″x14″ (Models: 501 & 401) & (Insulated Models 511 & 411)
  • Ranch Panel size: 42″x15″ (Models 502 & 402) & (Insulated Models 512 & 412)
  • Carriage Panel size: 19″ x 15″ (Models 50C & 40C) & (Insulated Models 51C & 41C)
  • Finish: Baked on polyester enamel
  • Colors selection: White, Brown, Almond, Sandstone
  • Bottom weather seal: U-shape loop type vinyl with aluminum retainer
  • 5 Year Limited Warranty
STANDARD WIDTHS: 8′-0″ 9′-0″ 10′-0″ 12′-0″ 14′-0″ 15′-0″ 16′-0″ 18′-0″
Traditional Panels 4 4 5 6 7 8 8 9
Ranch Panels 2 2 2 3 3 4 4 4
Carriage Panels 4 4 4 6 6 8 8 8
Standard Heights: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″ 14′-0″
Sections 4-21″ 3-18″,2-21″ 6-18″ 2-18″,4-21″ 5-21″ 1-18″,6-21″ 8-21″

OPTIONS

  • Widths up to 18′ in one inch increments, heights up to 14′ in three inch increments
  • 3/4″ ABS vinyl-backed polystyrene insulation
  • 7 Window Designs, see “Design Page”
  • 25,000, 50,000 & 100,000 cycle torsion springs
  • 1/8″ clear annealed glass standard, check availability in your area for other glass
  • Low clearance, high lift or vertical lift track and hardware also available

HARDWARE

15″ or 12″ radius torsion hardware; track is 2″ bracket mounted. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.