Residential Wood Garage Door Services

Heritage Classic

Heritage

Heritage Classic™ is Northwest Door’s finest handcrafted carriage house style garage door. These flush insulated wood doors are built with specially framed and sized sections to receive wood overlay designs. Skilled artisans can replicate most any design that you or your architect can create. Choose from select woods like Cedar, Tight Knot Cedar, Redwood, Knotty Alder, VG Fir, Mahogany and other fine woods.

CONSTRUCTION

Door frames are constructed using 1-1/8″ thick finger-jointed West Coast kiln dried Hem/Fir heavy stile and rails, Tongue & Groove weather joint at meeting rails and a 1-1/8″ Polystyrene core. 1/4″ Luan Mahogany Plywood is pressure laminated to both sides of frame (E Series) or 3/8″ MDO Plywood on exterior (M Series). A 3/4″ thick wood overlay is applied to the door face to create the design, the (C & H Series) have an addition layer of T&G material applied to the door face prior to the application of the overlay design. The overlay material is back cut with 1/8″ grooves to help resist cupping or warping before it is applied to the door. All windows are true divided, if overlay is an arched pattern, the top of the windows are also arched. Door faces are Paint Grade unless otherwise specified Stain Grade.

NOMINAL SPECIFICATIONS

  • Frame thickness: 1-1/8″, Face material thickness: 1/4″, Overlay thickness: 3/4″,
  • Overall door thickness: E Series 2-3/8″, M Series 2-1/2″, C Series 3-1/4″
  • End Stiles: 5-1/2″, Center Stiles: 10
  • Bottom Rail: 7-1/2″, Top Rail: 5-1/2″, Meeting Rail width combined: 5″
  • Arches: Standard radius for doors up to 10′ wide door are 15′-0″ radius, those over 10′ wide are a single 58′-0″ radius or two 15′-0″ radius arches (double arches)
  • Calculated insulation rating through section, R Value=6.18
  • Finish: Face sanded ready for finishing
  • 1 Year Limited Warranty
STANDARD WIDTHS: 8′-0″ 9′-0″ 16′-0″ 18′-0″
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″ 14′-0″

For ease of operation do not exceed 28″ Section Height

OPTIONS

  • Widths up to 20′, heights up to 14′, in one inch increments (180 max. sq. ft. total)
  • Stain Grade, with no putty
  • Custom arches (an exact radius must be specified or a template provided by the buyer)
  • V-grooves cut at 3″, 5″, or 8″ on center on M Series (Paint Grade only)
  • Many select wood overlays are available (Clear Western Red Cedar is standard)
  • Decorative hardware
  • 25,000, 50,000 & 100,000 cycle torsion springs
  • 1/8″ clear annealed glass standard, clear obscure and insulated glass optional.
  • Low clearance, high lift or vertical lift track and hardware also available

HARDWARE

The Heritage is equipped with heavy duty 15″ radius torsion hardware; track is 2″, verticals are angle mounted, horizontal track has continuous reinforcing angle. 3″ track supplied when required by weight. Long stem 10 ball bearing rollers with nylon races, non corrosive door fixtures and graduated 14 Ga. double end hinges are standard. All doors include one strut per section, 2-1/4″ or 3″ depending door width and weight.


Builder Collection

Builder Collection

Engineered with the builder in mind, The Builder Collection has been designed to be a reasonably priced alternative to our fully customized wood Carriage House Style garage doors. The allure of natural wood combined with beautiful styling will add curb appeal and value to your home.

CONSTRUCTION

Door frames are constructed using 1-1/8” thick finger-jointed West Coast kiln dried Hem/Fir stile and rails, Tongue & Groove weather joint at meeting rails and a 1-1/8” Polystyrene core. 1/4” Luan Mahogany Plywood is laminated and stapled to both sides of the frame. A 5/8” thick wood overlay is applied to the door face to create the door design. All windows are a grid style; if the design includes arched windows, the window grid is arched. Door faces are Paint Grade or Stainable as specified by buyer. Choose from either 5/8″ thick Meranti Mahogany or Western Red Cedar overlay material applied over Luan Plywood. All doors must be prepared for finish, prime painting is an available option.

NOMINAL SPECIFICATIONS

  • Frame thickness: 1-1/8”, Face material thickness: 1/4”, Overlay thickness: 5/8”
  • Overall door thickness: 2-1/4”
  • End Stiles: 2-1/2”, Center Stiles: 2-1/2”
  • Bottom Rail: 5”, Top Rail: 5”, Meeting Rail width combined: 5”
  • Arch: Standard radius for all arched door designs are 15’-0” radius. Single car doors; 8’ to 10’ wide door have one arch. Double car doors; 15’-6” to 18’ have two 15’-0” radius arches (double arches). Arched designs are not available on the 12’ wide doors.
  • Calculated insulation rating through section, R Value=6.18
  • Doors are unfinished and require light sanding and preparation before applying door finish.
  • 1 Year Limited Warranty
AVAILABLE WIDTHS: 8′-0″ 9′-0″ 10′-0″ 12′-0″ 15′-6″ 15′-8″ 16′-0″ 18′-0″
AVAILABLE HEIGHTS: 6′-6″ 6′-9″ 7′-0″ 7′-6″ 7′-9″ 8′-0″ 8′-6″ 9′-0″

For ease of operation do not exceed 28″ Section Height

OPTIONS

  • Paintable or Stainable door face
  • Prime painting
  • Decorative hardware
  • 25,000, 50,000 & 100,000 cycle torsion springs
  • 1/8” clear annealed glass standard, clear obscure is optional
  • Angle mounted standard lift track
  • Low clearance, high lift or vertical lift track and hardware

HARDWARE

The Builder Collection is equipped with heavy duty 15” radius torsion hardware; bracket mounted 2” track is 2”. 10 ball bearing rollers with nylon races, non corrosive door fixtures and graduated 14 Ga. double end hinges are standard. Single car doors include one 2-1/4” strut per door; double care doors include one 2-1/4” strut per section.


Township Collection

Township Collection

The Township Collection™ by Northwest Door® is your answer for the builder or homeowner who desires real wood carriage house style garage doors at a modest price. Large design selection and excellent quality makes Township an outstanding and popular product for your home.

CONSTRUCTION

Door frames are constructed using 1-3/8″ thick finger-jointed West Coast kiln dried Hem/Fir Mortise and Tenon stiles and rails with shiplap joints at meeting rails. Door panels are constructed of 1/4″ exterior glued Luan Mahogany plywood. Windows are grid style and are attached to the door frame. All Township doors over 12 feet wide have 1/4″ Luan Mahogany plywood attached to inside of the bottom section for optimum strength and rigidity.

NOMINAL SPECIFICATIONS

  • Frame thickness: 1-3/8″
  • Top & Bottom Rail widths: 4-7/8″, Meeting Rail Width combined: 4-1/2″
  • End Stile width: 4-7/8″, Center Stile width: 9″
  • Mullions: 2-5/8″ and 1″
  • Panels: 1/4″ Luan Mahogany plywood
  • Glass: 1/8″ clear annealed
  • Arches: Standard radius for doors up to 10′ wide door are 15′-0″ radius, those over 10′ wide are a single 58′-0″ radius or two 15′-0″ radius arches (double arches)
  • Finish: Unfinished, face sanded ready for finishing
  • 1 Year Limited Warranty
STANDARD WIDTHS: 8′-0″ 9′-0″ 16′-0″ 18′-0″
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″ 14′-0

For ease of operation do not exceed 28″ Section Height

OPTIONS

  • Widths up to 20′, heights up to 12′, in one inch increments (180 max. sq. ft. total)
  • 1/4″ Rough Sawn Fir plywood panel
  • 3/8″ grooved Medium Density Overlay plywood with V-grooves 3″or 4″ on center
  • 3/4″ Western Red Cedar or West Coast Hem/Fir raised panels
  • Solid Rail West Coast Hem/Fir wood frame (more suitable appearance for staining)
  • Flush back of bottom section with 1/4″ plywood (standard on doors over 12 ft. wide)
  • Flush back of door 1/4″ Luan plywood & insulate with 5/8″ Polystyrene insulation
  • Decorative hardware
  • 1/8″ clear annealed glass standard, clear obscure and insulated glass optional
  • Low clearance, high lift and vertical lift track and hardware

HARDWARE

The Township Collection is equipped with 15″ radius torsion hardware; track is 2″ bracket mounted and has a 65″ horizontal reinforcing angle. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. Doors 8′ and 9 wide include one 2-1/4″ galvanized strut per door; 16′ and 18′ wide doors include one 2-1/4″ strut per section.


Panel Garage Doors

Panel Garage

The garage door is a focal point of your home. Selecting a beautiful raised or recessed panel door will make a lasting impression. A luxurious real wood garage door adds warmth and elegance to any home and to its surrounding. Northwest Doors are manufactured by seasoned craftsmen and use only the finest materials available, “They are built to last, beautifully”.

CONSTRUCTION

Door frames are constructed using 1-3/8″ thick finger-jointed West Coast Hem/Fir with Mortise and Tenon stiles and rails. Choose from these recessed 1/4″ panel materials, Luan Mahogany Plywood Panels (Model 321), Rough Sawn Fir Plywood (Model 326), and Tempered One Side Hardboard Panels (Model 322). Raised panels are 3/4″ thick, Hem/Fir Panels (Model 323), MDF Panels (Model 327), Clear Cedar Panels (Model 328), and Redwood Panels (Model 324). Also available, the All Cedar Raised Panel Door (Model 828) manufactured with solid Western Red Cedar Frame and Clear Western Red Cedar Panels.

NOMINAL SPECIFICATIONS

  • Frame thickness: 1-3/8″
  • Top & Bottom Rail widths: 4-7/8″, Meeting Rail Width combined: 4-1/2″
  • End Stile width: 4-1/2″, Center Stile width: 2-5/8″
  • Raised Panel thickness: 3/4″
  • Finish: Face sanded ready for finish
  • 1 Year Limited Warranty
STANDARD WIDTHS: 8′-0″ 9′-0″ 10′-0″ 12′-0″ 16′-0″ 18′-0″
Panels Horizontally 2,3,4 2,3,4 3,4 3,4,6 4,5,8 5,8
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 12′-0″ 14′-0″
Recessed Panels Vertically 4,5 5 5 5 6 7
Raised Panels Vertically 5 6 7 8 9 11

Raised panels can not exceed 11-1/2″ in height

OPTIONS

  • Widths up to 18′, heights up to 14′, in one inch increments
  • Solid Rail West Coast Hem/Fir Wood Frame (more suitable appearance for staining)
  • Mahogany and other select woods are available (special order)
  • Flush Back of bottom section with 1/4″ Luan Plywood (increases rigidity of door)
  • Flush Back of door 1/4″ Luan Plywood & Insulate with 5/8″ Polystyrene Insulation
  • Laminated Panels, 1/8″ Plywood is pressure laminated to the back to help avoid splitting
  • Designs, see “Design Page” this section
  • Clear and clear obscure glass.
  • Low clearance, high lift and vertical lift track and hardware

HARDWARE

15″ or 12″ radius torsion hardware; track is 2″ bracket mounted. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.


Flush Garage Doors

Flush Garage Doors

Northwest Door® offers wood garage doors with a plain flush design that is often suited for your home. This sleek smooth appearance can soften the appearance and be a very elegant addition. The flush design works well with arched door openings or create and apply a lightweight design to add your own personal touch.

CONSTRUCTION

Door frames are constructed using 1-1/8″ thick finger-jointed West Coast kiln dried Hem/Fir stiles and rails with Tongue & Groove weather joints at meeting rails. 1/4″ Luan Mahogany Plywood is attached to exterior side of the door frame (Model 051) or 1/4″ Rough Sawn Plywood on the exterior (Model 056). A 1-1/8″ thick polystyrene core and 1/4″ Luan Mahogany Plywood back can be added to these models to increase to insulating qualities and add additional strength to the door. These models are (Model 141) with Luan Mahogany Plywood on exterior and (Model 146) with Rough Sawn Fir Plywood on exterior. Door faces are Paint Grade unless otherwise specified Stain Grade for staining purposes.

NOMINAL SPECIFICATIONS

  • Frame thickness: 1-1/8″
  • Top & Bottom Rail widths: 2-1/8″
  • Meeting Rail Width combined: 4-1/4″
  • End Stile width: 2-1/8″
  • Center Stile width: 2-1/8″
  • Models 141 and 146, calculated insulation rating through section, R Value 6.18
  • 1 Year Limited Warranty
STANDARD WIDTHS: 8′-0″ 9′-0″ 10′-0″ 12′-0″ 16′-0″ 18′-0″
STANDARD HEIGHTS: 7′-0″ 8′-0″ 9′-0″ 10′-0″ 11′-0″ 12′-0″ 14′-0″

OPTIONS

  • Widths up to 18′, heights up to 14′, in one inch increments
  • Stain Grade (more suitable appearance for staining)
  • Wide Bottom Rails or Sloped Trailer Sections are available for sloped floors
  • 1/8″ clear annealed glass standard, clear obscure and insulated glass optional.
  • Low clearance, high lift or vertical lift track and hardware also available

HARDWARE

15″ or 12″ radius torsion hardware; track is 2″ bracket mounted. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. U-shaped galvanized struts are supplied with every double car door to keep the door rigid.